Epoxy Flake Floors Installed in a Basement and Garage

Here's what we were working with - a basement floor that had old paint peeling off in chunks and raw concrete showing through, plus a garage slab with years of grime baked in. Not exactly a great starting point. But that's exactly where the prep work matters most, and we don't cut corners on it.

Before any product touched the floor, we ground the concrete down properly and installed a moisture vapor barrier in the basement. That step alone is the difference between a floor that lasts and one that bubbles and peels in a couple years. Skipping it might save a little time upfront, but you'll pay for it later. We don't let that happen.

For the garage, we went with Domino flake - a sharp black and white blend that holds up to everything you throw at it. The basement got Loon, a warmer tan, white, and black mix that works great in a finished living space. Both colors are broadcast over an epoxy base and sealed with a polyaspartic topcoat, which is tougher and more UV-stable than standard epoxy clear coats.

What you end up with is a floor system that genuinely performs. The polyaspartic topcoat resists hot tire pickup, chemicals, and scuffs. It's also easy to clean - just sweep or mop and you're done. No more staining into porous concrete, no more paint flaking off. Just a clean, durable surface that looks good every single day.

Two very different spaces, two different color palettes, one consistent build quality underneath. That's what a proper flake floor system looks like from start to finish.